하비킹 BSR RACING BZ-444 PRO 1/10 4WD RACING BUGGY - 17.5T STOCK VERSION (ARR)

송수신기 새들팩만 있으면 바로 굴릴수있는 세트상품

바디는 밸크로 타입으로 찍찍이로 붙일수 있다.  클리어바디로 도색이 필요하다.

가격대비 만족스러운 1/10 버기카

Xt60 짹으로 되어있다.

The BZ-444 Pro is the latest competition ready chassis from BSR racing. Designed and manufactured by Team C Racing with a huge range of option parts such as front and rear metal gear diffs, anodised aluminium motor mount with integrated heatsink, aluminium hinge pin holders font and back, and the absolutely superb Team C aluminium shocks already included. And it's available as either a build it yourself kit or a 17.5 Stock Class almost ready to run. 

This is an incredibly well balanced buggy and with all the upgrade and option parts available it will suit racers from novices right through to seasoned mod drivers. It can easily be tuned to a variety of track surfaces so it's ideal for racers who visit tracks with diverse surfaces. It is also incredibly simple to work on with only only a few screws needing removal for access to most of the commonly serviced items.

We opted to supply this buggy with a ROAR approved TrackStar 17.5T motor and TrackStar 80a Turbo ESC so it can be used straight out of the box at the many tracks around the world that offer a 17.5T Stock class or as a novice class entry level buggy that can either be sped up when the driver gains confidence with Turbo Boost or a simple motor upgrade.

So if you're ready to take the next leap in a 4WD buggy get yourself a BZ-444 Pro.


Features:
• Almost Ready to Run - Just install your own radio system and battery
• Includes ROAR approved electronics 
• Specially tuned for 17.5 Stock Class 
• Adjustable camber, caster and shock mounting positions
• Saddle pack battery layout chassis for the best weight distribution
• Shaft driven 4WD system
• Adjustable slipper clutch
• Metal gear front/rear differential
• Fine turned Aluminum shocks
• Tons of Aluminum upgrade parts are already included
• Pre-glued super soft compound tires with dish wheel
• Trimmed clear body shell w/decal sheet and masking tape included
• Pre-installed motor, ESC, and steering servo
• Full spare and option parts list support 

Specs:
Length: 410mm
Width: 250mm
Height: 140mm
Wheelbase: 285mm
Internal Gear Ratio: 2.5:1
Hex Hub Size: 12mm
Battery Tray Dimensions: 68.2x46.9x25mm x 2 (Saddle pack battery size)
Servo: TrackStar TS-D99X Digital 10kg / 0.08sec
Motor: TrackStar 17.5T sensored brushless motor (ROAR approved)
ESC: Trackstar 80A Turbo Sensored brushless ESC (ROAR approved)

Required:
4 x AA battery for transmitter
2S 7.4V Saddle Lipo Pack
Paint for body shell
Tools